Comprises: 
Trumpet snake, lightning fast valve/slide oil, two step mouthpiece brush, tuning slide grease, microfibre polishing cloth, valve brush, cordura carrying case. 

How to use:

1.  Remove the valves, top caps, bottom caps, slides and set all aside. Flush out the body with lukewarm water in a shower/bath/sink and use a flexible brush with a tiny bit of washing up liquid. Do not use hot or boiling water as this may damage the finish. Be sure to rinse thoroughly. 

2.  Clean inside the valve casings using a valve casing brush (and a little washing up liquid, then leave the instrument to dry thoroughly. Screw the bottom caps back on with a little grease to stop them sticking. Wipe down the valves with a lint-free cloth, then add two or three drops of new oil, being careful not to over oil. Replace the valves in the corresponding casings.  

3. Do the same with the mouthpiece using the mouthpiece brush.